Why Won’t My Key Fob Work?

September 2, 2025

Black Toyota key and fob on stainless steel counter top.


You press the button on your car key fob expecting the doors to unlock—but nothing happens. Frustrating, right? Key fobs are designed for convenience, but when they stop working, they can leave you locked out or scrambling to find a solution. If you’re wondering, “Why won’t my key fob work?”, here are the most common reasons and what you can do about them.


1. The Battery Is Dead

The number one reason a car key fob stops working is a weak or dead battery. These tiny coin-cell batteries don’t last forever.

 

What you’ll notice:

  • The fob only works when you’re very close to the car.
  • It works sometimes, but not always.
  • It completely stops working.

 

FIX: Replacing the battery is quick and inexpensive. Check your owner’s manual for the exact battery type and instructions.


Black Jeep key fob battery on wooden desk.


2. Worn or Damaged Buttons

Over time, the buttons on your key fob can wear out. Dirt, dust, or moisture can also cause the contacts inside to fail.

 

FIX: If the buttons feel loose or unresponsive, the fob may need a new shell—or in some cases, a full replacement.

 

Damaged car key fob.


3. Signal Interference

Key fobs use radio frequency signals to connect to your car. Sometimes those signals get blocked. Things like other electronics, power lines, or parking structures can interfere.

 

FIX: Step away from the area and try again. If the fob works fine in a different location, interference was likely the issue.



4. Lost Programming

If your key fob loses its programming, your car won’t recognize it. This can happen after a battery swap, electrical reset, or when trying to use a spare key fob.

 

FIX: Some vehicles allow reprogramming at home by following steps in the manual. In many cases, though, you’ll need help from a dealership or repair shop.


Old vehicle car battery.


5. Vehicle Receiver Problems

Sometimes the fob is fine, but your car’s receiver isn’t picking up the signal. If the receiver fails, none of your key fobs will work.

 

FIX: This problem usually requires professional diagnostics and repair.

 


6. Physical or Water Damage

Dropping your key fob or getting it wet can damage the circuit board inside. Once that happens, the fob often stops working altogether.

 

FIX: In most cases, replacement is the only solution.


Jeep key fob circuit board on wooden desk.


Quick Troubleshooting Checklist


If your key fob isn’t working:

  • Replace the battery first.
  • Inspect the fob for visible damage.
  • Try a spare fob if you have one.
  • If nothing works, have your car and fob checked by a professional.



Need help with your vehicle's key fob? We can help! We can help Lou's Car Care & Fleet Services has been proudly serving Baldwinsville, NY, and surrounding communities since 1976. Call us or schedule your next appointment online today! 




SCHEDULE APPOINTMENT









Let's Connect! Click on the links below to stay in touch with the Lou's Car Care Community: